CE Certification
ISO Certification
Our safety shoes fully comply with EN ISO 20345, GB 21148-2020 and carry CE certification, meeting the highest global requirements on safety shoes.and sustainable development. Our goal is to provide durable, high-performance work shoes while reducing environmental impact, supporting green industry, and creating long-term value for workers, clients, and the planet.
Standard
IMPACT RESISTANCE (ISO 20345:2011,CLAUSE NO-5.3.2.3)
Requirement
Size 42, inside height 14.0mm (Min.)
Test Result
With 200J power impact, inside height of right shoe is 15.5mm, inside height of left shoe is 15.5mm.
Standard
COMPRESSION RESISTANCES ISO (20345:2011,CLAUSE NO-5.3.2.4)
Requirement
Size 42, inside height 14.0mm (Min.)
Test Result
With 15kN power compression, inside height of right shoe is 15.0mm, inside height of left shoe is 15.0mm.
Standard
PENETRATION RESISTANCE - DETERMINATION OF PENETRATION FORCE -COMPLETE FOOTWEAR (ISO 20345:2011 CLAUSE 6.2.1.1.2)
Requirement
at 1100 N tip of the test nail should not penetrate through the test piece.
Standard
at 1100 N, the tip of the test nail didn’t penetrate through the piece.
Standard
SLIP RESISTANCE (SRC) (ISO 20345:2011, CLAUSE NO-5.3.5.4) Size 42
Requirement
Condition-A (forward heel slip): 0.28 (min.)
Condition-B (forward flat slip): 0.32 (min.)
Condition-C (forward heel slip): 0.13 (min.)
Condition-D (forward flat slip): 0.18 (min.)
Test Result
Condition-A (forward heel slip): 0.35 (min.)
Condition-B (forward flat slip): 0.34 (min.)
Condition-C (forward heel slip): 0.15 (min.)
Condition-D (forward flat slip): 0.19 (min.)
Standard
RESISTANCE TO FUEL OIL (OUTSOLE) (ISO 20345: 2011,CLAUSE NO.6.4.2)
Requirement
Size 42, Steeping the outsole into Iso-octane for 22 hours,
the volume change must be ≤12%
Test Result
4.9%
Standard
ABRASION RESISTANCE- OUTSOLE (ISO 20345:2011,CLAUSE NO.5.8.3)
Requirement
With 10N pressure, the outsole will run for 40 meters with #60 sandpaper,
the volume abrasion loss must be ≤250 mm³.
Test Result
73.3 mm³
